API Plan 53C

API Plan 53C

Barrier fluid system pressurized by a piston accumulator supplying clean liquid for an arrangement 3 pressurized dual seal. The barrier pressure is generated from the seal chamber pressure. The system is self-energizing and reacts to fluctuations in the seal chamber fluid pressure.

A  Cooler
B  Piston accumulator
C  Pressure reference
D  Drain
E  Vent

Seal chamber details

3  Pressure reference
4  Flush (F)
5  Liquid barrier OUT (LBO)
6  Liquid barrier IN (LBI)
7  Seal chamber

Example seal: EagleBurgmann MBS682-PTA dual metal bellows mechanical seal.

P&ID according to API


1  Make-up barrier liquid
2  Piston accumulator
5  Liquid barrier OUT (LBO)
6  Liquid barrier IN (LBI)
8  Vent
9  Barrier fluid drain

LI  Level indicator
LT  Level transmitter
PRV  Pressure relief valve*
PDIT  Differential pressure transmitter with local indicator
TI  Temperature indicator*

* If specified
** Vertically oriented, finned air cooler may be provided if specified


  • A piston accumulator dynamically adjusts the barrier pressure which is based on the seal chamber pressure, thus maintaining a fixed, steady differential pressure across the inboard seal faces.
  • Barrier liquid enters the process medium through the inner seal faces.
  • Uses the seal chamber pressure as a reference pressure and accordingly magnifies the barrier pressure by a pre-defined ratio.
  • Highly reliable since there is no need for an external pressure source.
  • Heat is removed with the help of a water cooler or an air cooler.
  • Uses an internal circulating device to ensure barrier liquid circulation.


  • For services where product dilution is acceptable.
  • For services where media is unsuitable for flushing the inner seal faces.
  • For services where Plan 53A cannot be used due to non-availability of a permanent, reliable nitrogen supply.
  • Ideal plan for applications with varying seal chamber pressures. Pressure ratio depending on stuffing box pressure range:
    • 4 bar (58 PSI) ... <10 bar (145 PSI) = piston ratio 1:1.5
    • 10 bar (145 PSI) ... <22 bar (319 PSI) = piston ratio 1:1.2
    • 22 bar (319 PSI) ... 40 bar (580 PSI) = piston ratio 1:1.1;
      For stuffing box pressures less than 4 bar (58 PSI) or above 40 bar (580 PSI) consult EagleBurgmann.
  • Check with the process engineer if product contamination is acceptable.

Remarks, checkpoints

  • Check barrier fluid compatibility with the media.
  • Vent the system before start-up. Later ensure that the vent line always remains closed.
  • Sense the seal inlet and outlet line temperatures. Difference in the temperatures is an indication of proper flow.
  • Ensure that the barrier pressure is always higher than the seal chamber pressure by at least 1.4 bar (20 PSI) (for piston ratio selection).
  • Since there is less barrier fluid volume in the accumulator, heat dissipation is very much a function of the cooler efficiency.
  • Ensure that the seal chamber reference line is not choked and that it is connected to the downstream of the accumulator.
  • Ensure proper heating or cooling of the reference pressure line if necessary.
  • Check the compatibility of the accumulator materials with the pump media.

Pump media characteristics

  • Non-polymerizing and clean media
  • Poor lubrication properties
  • Hazardous / environmentally harmful
  • Close to vaporization point
  • Can tolerate dilution with barrier media

Location, function

  • Between seals
  • Barrier system (psealchamber < pbetweenseals)
  • Lubrication, flushing and cooling for both inboard as well as outboard seals




API 682 4th Edition

Contact us

Follow the direct link to your API 682 4th ed. contact

Show locations

API piping plan tool

Download the free EagleBurgmann API piping plan tool and benefit from useful and practical information

PDF download - 4.0 MB

Excellence in Practice

With our free e-mail newsletter „Excellence in Practice“, you will receive first-hand information about current products, services, references and worthwhile industry insights.